Raymarine C140w Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 222

Raymarine C140w Скачать руководство пользователя страница 112

Tuning method

Related options

Description

you should adjust it
again approximately
10 minutes after
powering up the
scanner, as the
required setting
will change after
the magnetron has
warmed up.

Selecting digital radar gain presets

In the radar application:

1. Press the

GAIN

softkey.

2. Press the BUOY MODE, HARBOUR MODE, COASTAL MODE,

or OFFSHORE MODE softkey, as appropriate.

The softkey is highlighted, and the display changes to reflect the
new mode.

Adjusting digital radar gain presets

Adjusting digital radar preset gain

In the radar application:

1. Press the

GAIN

softkey.

2. Press the BUOY MODE, HARBOUR MODE, COASTAL MODE,

or OFFSHORE MODE softkey, as appropriate.

3. Press the same softkey again.

The softkeys change to provide more options.

4. Press the

GAIN

softkey repeatedly until the MAN option is

selected.

5. Using the rotary controller, adjust the gain control to the

appropriate setting (between 0 and 100%).

6. Press the

OK

button.

Adjusting digital radar color gain

In the radar application:

1. Press the

GAIN

softkey.

2. Press the BUOY MODE, HARBOUR MODE, COASTAL MODE,

or OFFSHORE MODE softkey, as appropriate.

3. Press the same softkey again.

The softkeys change to provide more options.

4. Press the

COLOR GAIN

softkey repeatedly until the MAN option

is selected.

5. Using the rotary controller, adjust the gain control to the

appropriate setting (between 0 and 100%).

6. Press the

OK

button.

Adjusting digital radar rain clutter

In the radar application:

1. Press the

GAIN

softkey.

2. Press the BUOY MODE, HARBOUR MODE, COASTAL MODE,

or OFFSHORE MODE softkey, as appropriate.

3. Press the same softkey again.

The softkeys change to provide more options.

4. Press the

RAIN

softkey repeatedly until the ON option is

selected.

5. Using the rotary controller, adjust the gain control to the

appropriate setting (between 0 and 100%).

112

C-Series Widescreen user reference

«
...
110
111
112
113
114
...
»

Содержание C140w































































































































































































































Отзывы:

Нет отзывов