Raymarine axiom pro 9 RVX, Руководство по установке

Страница: 25 / 360

Touchscreen location requirements
Touchscreens offer an alternative to using physical buttons to control your display. Full product
functionality can be achieved using the Touchscreen.
Note:
Touchscreen performance can be affected by the installation environment, specifically
Touchscreen displays installed above decks, where it will be open to the elements may exhibit the
following:
• Hot Touchscreen temperature — If the display is mounted where it will be exposed to prolonged
periods of direct sunlight, the touchscreen may get very hot.
• Erroneous Touchscreen performance — Exposure to prolonged rain and / or water wash over
may cause the display to respond to ‘false touches’, caused by the rain/water hitting the screen.
If, due to the required installation location, exposure to these elements is anticipated then it
is recommended that you consider:
• locking the Touchscreen and using the physical buttons instead — HybridTouch displays
• attaching a third-party ‘display hood accessory’ to reduce direct sunlight exposure and the
volume of water that the display is exposed to.
• installing a remote keypad such as the RMK-9 and operating the display remotely — Touch -only
displays
• upgrading to a HybridTouch display and using the physical buttons instead — Touch -only
displays
Wi-Fi location requirements
A number of factors can influence Wi-Fi performance, it is important to ensure you test the Wi-Fi
performance, at the desired location before installing Wi-Fi enabled products.
Distance and signal strength
The distance between Wi-Fi products should always be kept to a minimum. Do not exceed the
maximum stated range of your Wi-Fi product (Maximum range will vary for each device).
Wi-Fi performance degrades over distance so products farther away will receive less network
bandwidth. Products installed close to their maximum Wi-Fi range may experience slow connection
speeds, signal drop outs or not being able to connect at all.
Line of sight and obstacles
For best results the Wi-Fi product should have a clear, direct line of sight to the product it will be
connected to. Any physical obstructions can degrade or even block the Wi-Fi signal.
The construction of your vessel can also have an impact on Wi-Fi performance. For example, metal
structural bulkheads and roofing will reduce and in certain situations, block the Wi-Fi signal.
If the Wi-Fi signal passes through a bulkhead containing power cables this can also degrade Wi-Fi
performance.
Reflective surfaces such as metal surfaces, some types of glass and even mirrors can drastically
effect performance or even block the Wi-Fi signal.
Interference and other equipment
Wi-Fi products should be installed at least 1m (3 ft) away from:
• other Wi-Fi enabled products
• transmitting products that send wireless signals in the same frequency range
• other electrical, electronic or electromagnetic equipment that may generate interference
Interference from other peoples Wi-Fi products can also cause interference with your products. You
can use a Wi-Fi analyzer tool to assess the best Wi-Fi channel (channel not in use or used by least
amount of devices) for you to use.
Installation 25