Raymarine axiom pro 9 RVX, Руководство по установке

Страница: 148 / 360

62
3. Select the Radar scanner that you want to associate with the
current instance of the Radar app.
4. Close the Settings page.
The current instance of the Radar app will change to display the
selected Radar scanner. Radar scanner selection shall persist over
a power cycle.
Alternatively, with the Radar powered off or in Standby, you can select
switch Radar scanner by selecting Change scanner.
Radar modes
The Radar app provides preset modes that can be used to quickly
achieve the best picture depending on your current situation. Only
Radar modes supported by your Radar scanner are shown.
To change Radar mode select the required mode from the Radar
app menu.
HARBOR
Harbor mode takes into account land
clutter that is typically encountered in
a Harbor, so that smaller targets are
still visible. This mode is useful when
navigating in a Harbor.
Radar scanners: All.
BUOY
Buoy mode enhances the detection of
smaller targets such as mooring buoys,
and is useful at ranges up to 3/4nm.
Radar scanners: SuperHD™ Open Array,
HD Open Array and HD Radome.
COASTAL
Coastal mode takes into account slightly
higher levels of Sea clutter that are
encountered out of Harbor areas. This
mode is useful when in open water but
keeping to coastal areas.
Radar scanners: All.