5.1 Service and maintenance
This product contains no user serviceable components. Please refer all maintenance and repair to
authorized Raymarine dealers. Unauthorized repair may affect your warranty.
Warning: High voltage
This product contains high voltage. Adjustments require specialized service
procedures and tools only available to qualified service technicians. There are
no user serviceable parts or adjustments. The operator should never remove the
cover or attempt to service the product.
Warning: FCC Warning (Part 15.21)
Changes or modifications to this equipment not expressly approved in writing by
Raymarine Incorporated could violate compliance with FCC rules and void the
user’s authority to operate the equipment.
Caution: Sun covers
• If your product is supplied with a sun cover, to protect against the damaging
effects of ultraviolet (UV) light, always fit the sun cover when the product is
not in use.
• To avoid potential loss, sun covers must be removed when travelling at high
speed, whether in water or when the vessel is being towed.
Routine equipment checks
It is recommended that you perform the following routine checks, on a regular basis, to ensure the
correct and reliable operation of your equipment:
• Examine all cables for signs of damage or wear and tear.
• Check that all cables are securely connected.
5.2 Product cleaning
Best cleaning practices.
When cleaning products:
• Lightly rinse or flush with clean, cool fresh water.
• Do NOT use: abrasive, acidic, ammonia, solvent or other chemical based cleaning products.
• Do NOT use a jet wash.
Cleaning the display screen
The touchscreen has an oleophobic protective coating. The oleophobic coating is a fingerprint
resistant, oil repelling coating used to protect your display screen. To remove fingerprints simply
wipe the screen gently with a clean, lint-free cloth, such as a microfibre cloth. For more stubborn
smears follow the steps below:
Important:
Do NOT use abrasive cloth or abrasive cleaning fluid to clean the screen as this will degrade the
protective coating and could scratch the screen.
1. Switch off the power to the display.
2. Clean the screen using a mild detergent solution and a clean, lint free cloth to remove all dirt
particles and salt deposits.
3. Rinse the screen with fresh, clean water to remove any remaining detergent.
Important:
Leaving detergent on the glass may deteriorate the protective coating.
50
