3.4 Axiom 7 flush and surface mounting
Removing the trunnion adaptor Axiom™ 7
The trunnion adaptor supplied fitted to the Axiom™ 7 can be removed to enable the adaptor to be
used as a clamp for surface and flush mount installations, the adaptor must also be removed before
installation the unit using the Rear mount brackets or Front Installation kit.
1. Unscrew the 4 x M5x16 screws using a 4 mm hex wrench (Allen key).
2. Pull the trunnion adaptor away from the MFD.
Surface or Flush mounting Axiom™ 7 only
When suitable access is available behind the desired mounting surface, the MFD can be surface or
flush mounted.
First, ensure you have removed the Trunnion adaptor from the rear of the MFD.
33
