Raymarine a125, Монтаж и начало работы

Страница: 12 / 20

Distribution panel connection
It is recommended that your product is wired through
your vessel’s distribution panel via a thermal breaker
or fuse.
D13017-1
2 3 1
4 5
6 7
1. Vessel power supply positive (+)
2. In-line fuse. (If your products power cable does not
have a built in fuse then an in-line fuse should be
fitted.)
3. Product power cable
4. Vessel power supply negative (-)
5. * Drain wire
6. Vessel distribution panel
7. * Vessel RF ground point connection
Note: * Only applicable to products that include a
drain wire on the product’s power cable.
Battery connection with RF ground
If your vessel does not have a distribution panel then
your product may be wired directly to the battery with
the drain wire connected to the vessel’s RF ground
point.
D13018-1
2 4 5 1 3
6 7
1. Vessel power supply positive (+)
2. Vessel power supply negative (-)
3. In-line fuse (If your products power cable does not
have a built in fuse then an in-line fuse should be
fitted.)
4. * Drain wire
5. Product power cable
6. Vessel battery
7. * Vessel RF ground point connection
Note: * Only applicable to products that include a
drain wire on the product’s power cable.
Battery connection with no RF ground
If your vessel does not have a distribution panel or
an RF ground point then your product may be wired
directly to the battery with the drain wire also connected
to the battery’s negative terminal.
D13019-1
2 4 5 1 3
6
1. Vessel power supply positive (+)
2. Vessel power supply negative (-)
3. In-line fuse (If your products power cable does not
have a built in fuse then an in-line fuse should be
fitted.)
4. * Drain wire connected to vessel negative power
supply.
5. Product power cable
6. Vessel battery
Note: * Only applicable to products that include a
drain wire on the product’s power cable.
GA150 connection
a9x and a12x MFDs include an internal GNSS (GPS /
GLONASS) receiver. The GA150 antenna can be used
to improve the GNSS (GPS / GLONASS) receiver’s
reception.
D13069-1
2 1
1. GA150 antenna
2. a9x or a12x variant MFD
For installation details for your external antenna, refer
to the documentation that accompanied the antenna.
Note:
• The Beidou GNSS is supported but not currently
available.
• A GA150 must be connected in order to receive
the Beidou system when it becomes available.
• A software update will be required to add support
for Beidou once the system is available. Please
check with your Raymarine dealer for further
details.
Antenna cable length
The GA150 is supplied with a fitted 10 m (33 ft.) cable.
The length of the antenna cable can be extended if
required.
The antenna cable length can be extended by up to
10 m (33 ft.) giving a total maximum cable length of
20 m (66 ft.)
50 ohm coaxial cable and reliable connectors (offering
protection against water ingress) must be used when
extending the antenna cable.
12 a9x / a12x