Raymarine 530 Скачать руководство пользователя страница 87

Страница: 87 / 170

Chapter 3: Standard Chart Operations

3-39

rin

g th

2. Press the

TRACK OFF ON

soft key to toggle tracks on.

Your vessels trail will be displayed on-screen, with a line joining the
points at the selected interval.

Clearing the Current Track

You can clear the current track from the screen. When you select

CLEAR

TRACK

, if the current track has not been saved, you have the option of saving it.

➤

To clear the current track:

1. Press the

CLEAR TRACK

soft key.

2. If the track has not been saved the

SAVE TRACK

soft keys are displayed.

To clear the track without saving it in the Track List, press

To save the track in the list, press

YES

. The Name track soft keys are dis-

played and you should continue as described in the following section, Sav-
ing and Naming a Track.

Press

CLEAR

to abort the Clear Track operation.

The current track is cleared from the screen and the default soft keys are
displayed.

Managing Tracks

Although it is easy to set up a track, and this track is retained even if you switch
off your display, you can store a number of different tracks so that you can
review them at a later date. This section explains how to perform the following
tasks:

•

Save and Name a track.

•

Name, Erase and Show an existing track.

Saving and Naming a Track

You can save up to 5 named tracks in the Track List. These tracks can be re-
displayed at a later date.

➤

To save and name the current track:

1. Press the

soft key followed by the

TRACK LIST

soft key. The track list

pop-up and associated soft keys are displayed.

D5674-1

TRACK

LIST

MORE¬

TRACK INTERVAL

0.1nm

TRACK

OFF ON

CLEAR

TRACK

SAVE

TRACK

LIST

Содержание 530











































































































































































Результаты поиска

Содержание 530

Отзывы:

Raymarine 530, Руководство пользователя, Страница: 87 / 170

Результаты поиска

Содержание 530

Отзывы: