Raymar 326X V.34 Series, Руководство пользователя

Страница: 87 / 213

0049-1800-xxx 326X V.34, V.34-SDC and V.32bis Series Modem – USER’S GUIDE 02/23/2010
Rev. A
Page 79 of 205
This command lets you change the value of an S-Register stored in volatile memory. n is the S-
Register to change, and x is the value. x must be a number within the S-Register’s range.
If you try to change the value of an unused S-Register, the modem displays
OK
.
Change the S-Register Value (AT=x)
This command lets you change the value of an S-Register stored in volatile memory. The “selected”
S-Register is the last S-Register that was accessed using an S-Register command or the ATS
n
command. x must be a number within the specified range for the S-Register. On power-up, S-Register
0 is “selected.”
If you try to change the value of an unused S-Register, the modem displays
OK
.
S-Register Descriptions
This S-Register specifies the ring on which the modem automatically answers a call. When set to 0,
automatic answering is disabled, and calls must be answered manually. This register has no meaning
unless
Answer
=Using S0 (ACU OPT’S).
S-Register 1 – Ring Count
This S-Register counts the number of rings in an incoming telephone call. If the modem is configured
to answer (AT*AA, or Answer=S0), when S-Register 1’s value equals S-Register 0’s value, the
modem answers the call. If no ring is received after a country-specific time (eight to 10 seconds), the
counter is reset to 0.