Raycus RFL-QCW300, Руководство пользователя

Страница: 28 / 50

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-QCW300/3000
24
Table 9 Interface Commands
Code Description Examples
ABF Aiming Beam OFF
Sent
：
“ABF”
Response
：
“ABF”
ABN Aiming Beam ON
Sent
：
“ABN”
Response
：
“ABN”
DEABC Disable External Aiming Beam Control
Sent
：
“DEABC”
Response
：
“DEABC”
DEC Disable External Control– Disables the external control input
Sent
：
“DEC”
Response
：
“DEC”
DGM Disable Gate Mode– Disables internal pulse generator.
Sent
：
“DGM”
Response
：
“DGM”
DLE Disable Hardware Emission Control
Sent
：
“DLE”
Response
：
“DLE”
DMOD Disable Modulation— Disables the modulation control input.
Sent
：
“DMOD”
Response
：
“DMOD”
DPM Disable Pulse Mode
Sent
：
“DPM”
Response
：
“DPM
EEABC Enable External Aiming Beam Control
Sent
：
“EEABC”
Response
：
“EEABC”
EEC Enable External Control– Enables the external control input.
Sent
： ：
“EEC”
Response
：
“EEC”
EGM
Enable Gate Mode—Enables internal pulse generator gated by
signal applied to modulation input.
Sent
：
“EGM”
Response
：
“EGM”
ELE Enable Hardware Emission Control
Sent
：
“ELE”
Response
：
“ELE”
EMOD Enable Modulation— Enables the modulation control input.
Sent
：
“EMOD”
Response
：
“EMOD”
EMOFF Stop Emission— Stops emission.
Sent
：
“EMOFF”
Response
：
“EMOFF
EMON Start Emission— Starts emission.
Sent
：
“EMON”
Response
：
“EMON”
EPM
Enable Pulse Mode
Sent
：
“EPM”
Response
：
“EPM”
RBT
Read Board Temperature— Reads the temperature of the laser's
control board. The response is an echo of the command, a
delimiter of “:” and the temperature in degrees centigrade.
Sent
：
“RBT”
Response
：
“RBT:36.6”
RCS
Read Current Setpoint—Reads the setpoint for the LD current.
The response is the command echoed back, followed by a
delimiter of “:”, and then the current setpoint in %.
Sent
：
“RCS”
Response
：
“RCS:56.7”
(Indicates that the LD current
setpoint is 56.7%)
受 控
武汉锐科