User’s guide Ytterbium Pulsed Fiber Laser RFL-P20MB Ver.: 2.0
2.2
Method of installation
1)
Fix the module stable to the bracket and keep the laser in good ventilation.
2)
Connect the power line to 24VDC power and ensure enough DC output power. Keep it clear
to the polarity of the electric current: anode-brown; cathode-blue; PE-yellow and green. The
definition figure is shown in Fig. 3.
24V+
24V
—
Figure 3. Definition of power line wires
3)
Make sure that the interface of the external controller matches the laser and the control cable
is well connected to the laser’s interface. The recommended electrical connection is shown in
Fig. 4.
Figure 4. Schematic of recommended electrical connection
4) The bending radius of the delivery fiber should not exceed 15 cm.
4
/
11
GND
