Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 500W
～
2000W laser
29
d
）
The power of the laser is controlled by the voltage obtained by PIN 22 and PIN 25 of
theDB25 interface connector.
e
）
The external MOD interface provides modulating signal for the laser.
f
）
Enable the laser to emit laser light through one of the following ways
：
1
）
PIN 6 and PIN 9 of the DB25 control interface is applied to 24V. – laser enable signal.
2
）
Press ‘Laser’ button on the front panel. – laser enable signal.
4.7.6 The Sequence Diagramof External AD mode
Figure 20 Control Sequence Diagram of ADMode
4.7.7 Wiring in Internal Control Mode
受
控
武汉锐科
