Wuhan Raycus Fiber Laser Technologies Co., Ltd.
Fiber Delivered Direct Diode Laser User Guide 1500W
17
4 Using the Product
4.1 Front Panel
Figure 5 shows the front panel (1500W model).
Figure 5: Front Panel View
1. REM/OFF/ON:
Key switch, the power switch of the laser. Insert the key; either turn the key
clockwise to the 'ON' position or counterclockwise to 'REM' position will power on the laser.
Then the laser will enter a control mode depending on your previous setup on the
'CTRL-INTERFACE'. You can refer to
4.6 Entering a Control Mode
for more details.
2. POWER:
Power Indicator, indicates that the power is switched on, when the green LED
illumines.
3. LASER:
Laser emission button, it’s a button with an annular LED indicator (red color). In
hyper terminal mode and AD mode, when this button is pressed down, the product is ready
to emit laser, and the LED illumines. Press again will release the button, and disable the laser
emission.
4. ALARM:
Alarm indicator, indicates a fault condition, when the yellow LED illumines.
