Raycus C30000XZ, Руководство пользователя

Страница: 87 / 93

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C30000XZ
79
Figure 61 Programming content interface in the current laser programming mode.
8.13.3 Empty all programming
Empty all programming interfaces stored in the current laser programming mode , as shown in
Figure 62. All programming stored inside the current laser will be emptied by clicking ‘Empty Program
List’.
Figure 62 Interface of empty all programming stored in the current laser programming mode.
8.13.4 Edit Programming
Programming editing when the laser is working in programming mode as shown in Figure 63.
Step 1: left click the pre-edited programming number.
Step 2: select the command under the command type, click ‘Add’.
Step 3: enter the parameters and click ‘Save’. The instruction appears in the left program list
immediately.
Step 4: after editing all commands, click ‘Write Laser’.
Step 5: the new programming number will turn green when user re-click the ‘refresher list’ button.
Write successfully.