Raycus C30000XZ, Руководство пользователя

Страница: 41 / 93

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C30000XZ
33
A2
Programming
Mode start-up
execution
Input signal
Import signal, rising edge start according to the
pre-downloaded programming instructions output
laser, program number is determined by the A8~A14.
The laser power is set by AD analog if the program
number is 0000000 and the A6 is high; if the program
number is 0000000 and the A6 is low, the laser power
is set by the host computer; if the program number is
0000000 and the A6 is low, the A3 is high, and the
output is controlled by the host computer software
A3
Enabling
Internal patterns
Input signal High level enables PC software control function
A4 Reset signal Input signal
High level effective, clear laser alarm bit, effective
high-level time at least 1 MS
A5
Red light
indicator
Input signal The effective red light indicates light.
A6
Simulation
control
enabling energy
Input signal
The input signal can simulate the input signal
（
Program num = 0000000
）
A7
Stop
programming
Mode
Input signal Stop programming mode at high power
A8 Program Num 0 Input signal Input signal, low position
A9
～
A14
Program
Num 1
～
6
Input signal Input signal ,1~6 bits high, select programming signal
A15
Synchronous
input
Input signal Backup
A16 COM
Reference
for all signals
C1
Laser-driven
power supply
Input signal
Input signal, up edge starts main power supply, down
edge turns off main power supply.
C2 null