Rayco RG74T-R Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 66

background image

RG74T-R Operator · Service · Maintenance

800.392.2686

25

Operation

Get To Know Your RG74T-R

1.  Display Panel LCM
2.  Fuel Tank
3. Blade
4.  Fuel Tank Fill
5.  Cutter Wheel
6.  Oil Filter and Dipstick
7. Engine
8. Battery / Hydraulic Tank
9. Radiator Cap
10. Radiator
11. Self-Propel Track Drive
12. Back-up Remote Control
13. Remote Receiver LCM

Before Operating the Machine

1. Review all of the safety decals that are placed on the

machine for your safety and convenience. See the Parts

manual for locating all decals on the machine.

2. Make sure that all shields and guards are in place, and

in good condition, prior to operating the machine.

3. Only responsible, properly instructed individuals should

operate this machine. Inexperienced operators must

always be carefully supervised.

4. Check the cutting wheel for damaged, worn or missing

teeth, and replace as necessary.

5. Make sure that no one is working on, underneath or close

to the machine before starting the engine or beginning

to move the machine. Make sure that the area is free of

personnel.

6. Check the stumps to be removed for embedded nails,

wire, metal fence posts, and for rocks or other buried

impediments which may become dangerously thrown

or cause unexpected machine movements when

encountered by the cutting wheel.

7. Ensure that everyone in the vicinity is aware of the

DANGER ZONE associated with this machine. (See

diagram above.) Everyone must avoid the DANGER

ZONE at all times when the machine is in operation!

8. Make no alterations or modifications to your Rayco

stump cutter unless requested or recommended by

Rayco Manufacturing Inc.

9. When starting the engine, the machine controls which

cause machine movements must be in the NEUTRAL

or OFF positions, so that machine motion, which may

result in death or severe injury, does not occur.

10. Do not start the engine or move any of the controls if

there is a “DO NOT OPERATE” or similar warning tag

attached to the machine.

BEFORE OPERATING THIS POWERFUL MACHINE,

PLEASE CONSULT THE SAFETY SECTION FOR

VITAL INFORMATION RELATED TO OPERATING.

NOTICE

To ensure the long life and economical operation of
your stump cutter, we highly recommend that the
operator be well instructed in both the operation
and maintenance of this machine.

«
...
23
24
25
26
27
...
»

Содержание RG74T-R



































































Отзывы:

Нет отзывов

Похожие инструкции для RG74T-R

Powerplus POWESET2

Бренд: VARO Страницы: 10

Бренд: Surtek Страницы: 16

Бренд: Milwaukee Страницы: 8

Бренд: Milwaukee Страницы: 21

Бренд: Milwaukee Страницы: 33

Бренд: Milwaukee Страницы: 33

Бренд: Milwaukee Страницы: 67

HEAVY DUTY M18 ONEFSAG115XPDB

Бренд: Milwaukee Страницы: 82

Бренд: Milwaukee Страницы: 63

Бренд: Milwaukee Страницы: 163

Бренд: BGS technic Страницы: 20

Бренд: GMC Страницы: 56

Бренд: GMC Страницы: 60

Бренд: Festool Страницы: 96

Бренд: Chicago Pneumatic Страницы: 32

Бренд: Proxxon Страницы: 46

Бренд: Parkside Страницы: 46

Бренд: Drill Master Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды