Rayco RG74T-R Скачать руководство пользователя страница 11

Страница: 11 / 66

RG74T-R Operator · Service · Maintenance

800.392.2686

Safety

General Hazard Information

• Read, understand and follow all instructions on the

machine and in the manuals before attempting to operate.

Keep all manuals in a safe place for future reference and

for ordering replacement parts.

• Familiarize yourself with all controls in a safe environment

before operation. Know how to stop the machine and

disengage the controls quickly.

• Never allow minors to operate this machine.
• Never allow anyone who has not had proper instruction

to operate this machine.

• Keep bystanders, children and pets away from the

machine and work area.

•  Never allow anyone to ride on this machine.
•  Never transport cargo, tools or wood on this machine.
•  Keep the operator zone and adjacent area clear for

safe, secure footing.

• Use the machine in daylight or under good artificial

lighting.

• Use this machine for its intended purpose only, deviation

from the machines capabilities could damage the

equipment and cause injury or death.

Engine exhaust contains products of combustion which can

be harmful to your health. Always start and operate the engine

in a well ventilated area. If you are in an enclosed area, vent

the exhaust to the outside.

Personal Protective Equipment

Head protection -

must conform to ANSI Z89.1 and DO

NOT wear under chin strapping while operating or within the

operation area of the Horizontal Grinder.

Eye protection -

must conform to ANSI Z87.1 and be the wrap

around style. Always wear the eye protection when operating

or working within the operational area of the machine.

Hearing Protection -

Plug type ear protection or full ear

coverage devices (muff type) shall be worn at all times when

operating or within the operational area of the machine.

Gloves -

When operating or handling brush within the

operational area of the Horizontal Grinder, loose fitting

gloves are the only gloves that should be worn. DO NOT

wear gauntlet or strapped gloves.

Clothing Protection -

Clothes must be close fitting, but

not restrictive of movement. DO NOT wear loose fitting

clothes, jewelry or long dangling clothing; i.e. neckties, long

belts or chains.

Hooded sweat shirts may be worn only if the hood is tightly

drawn around the face with drawstrings tucked into the

outer garment when not in use. If working near traffic, wear

reflective clothing.

Shoes -

(Foot Protection)- Always over the ankle work boots

with skid resistant soles.

Breathing Protection -

When breathing protection is required

the use of paper masks that can tear away if caught or

entangled in material or machine must be worn.

Flying Debris

Do not allow anyone to stand in front or directly behind the
machine.

Flying debris could be thrown past guards and

injure bystanders if they are in these areas.

Содержание RG74T-R


































































Результаты поиска

Содержание RG74T-R

Отзывы:

Похожие инструкции для RG74T-R

Бренды по названию

Популярные бренды

Rayco RG74T-R, Инструкция оператора, обслуживания и технического обслуживания

Результаты поиска

Содержание RG74T-R

Отзывы:

Похожие инструкции для RG74T-R

Бренды по названию

Популярные бренды