Rayco RG165T-R Скачать руководство пользователя страница 4

Страница: 4 / 72

RG165T-R Operator · Service · Maintenance

Foreword

Literature Information

The operators manual should be stored in the operator’s

compartment in the literature holder storage area. Rayco

provides a binder to hold the Operator Service Manual, Parts

Manual, Engine Manual along with other component manuals.

These manuals contain safety information, operation

instruction, transportation information, lubrication information

and maintenance information.

Some photographs or illustrations in the publication show

details of attachments that can be different from your machine.

Guards and covers might have been removed for illustrative

purposes. Continuing improvement may have caused changes

to your machine which may not be included in this publication.

Continuing improvement and advancement of product

design might have caused changes to your machine which

are not included in this publication. Read, study and keep

this manual with the machine.

Whenever a question arises regarding your machine, of this

publication, please consult your Rayco dealer for the latest

available information.

Safety

The safety section lists basic safety precautions. In addition,

this section may include text and locations of warning signs

and labels used on the machine.

Read and understand the basic precautions listed in the

safety section before operating or performing lubrication,

maintenance and repair on this machine.

Parts

Parts are readily found through illustrations with accompanying

Rayco part numbers. The machine assembly is listed by basic

groups to enable ease of finding parts.

Please consult your local Rayco Dealer or local Engine

Manufacturer Dealer for obtaining engine parts and service

Operation

The operation section is a reference for the new operator

and a refresher for the experienced operator. This section

includes a discussion of gauges, switches, machine controls,

attachment controls, transportation and towing information.

Photographs and illustrations guide the operator through

correct procedures of checking, starting, operating and

stopping the machine.

Operating techniques outlined in this publication are basic.

Skill and techniques develop as the operator gains knowledge

of the machine and its capabilities.

Содержание RG165T-R








































































Результаты поиска

Содержание RG165T-R

Отзывы:

Похожие инструкции для RG165T-R

Бренды по названию

Популярные бренды

Rayco RG165T-R, Инструкция оператора, обслуживания и технического обслуживания

Результаты поиска

Содержание RG165T-R

Отзывы:

Похожие инструкции для RG165T-R

Бренды по названию

Популярные бренды