Rayco C275, Инструкция оператора, обслуживания и технического обслуживания

Страница: 30 / 94

C275 Operation & Service Manual
30
DP600 Main Display Panel
Items on the Main Display Screen:
1) Seat belt buckled, wipers on and 2-speed engaged.
2) Hydraulic Pressure monitor screen
3) Stump Cutter Engage
4) Fault Indicator Screen
5, 6 or 7) Engine Data screens
8) Reversing Fan Sequence Start (fan will slow to a stop,
reverse, slow to a stop and then return spinning forward)
Hydraulic Pressures Screen
Depress “Hydraulic Pressure Icon” (item #2) to view ALL
real-time system pressures.
To return back to the main screen, Depress “Door Icon”
(Item# 8)
Fault Indicator Screen
• To view Engine Faults Screen, depress the Right Arrow
Key.
• To return to the main screen, depress the “Door Icon”
(Item #8).
• To reset the rocker switch calibration, depress Item #5.
Rocker Switch Calibration Procedure (Not applicable for
stump cutter attachment):
• When the indicator next to the Flap Joy Sensor NoCal
is on check the calibration indicators next to button #5.
• Once the CEN indicator is on, push the rocker to its full
forward position and hold until the MIN or Max indicator
appears (approx. 5 seconds).
• Now place the rocker in the full reverse position and hold
until the other indicator appears.
• Once MIN, MAX and CEN are all displayed the switch
is calibrated.
• Pressing button #5 will prompt the user to clear the
current calibration values. Re-calibration is recommended
after replacing the joystick.
Engine Faults Screen
1) Switch between Active and Inactive Faults
5) View the previous fault.
6) View the next fault
8) Return to the Main Screen.
Depress the Left Arrow button to return to the Faults Screen.
1
2
3
4
5
6
7
8
OK
ESC
1
2
3
4
5
6
7
8
OK
ESC
Operation
1
2
3
4
5
6
7
8
OK
ESC
1
2
3
4
5
6
7
8
OK
ESC
Display Screens the same?