Important Safeguards
nVent RAYCHEM Pyrotenax mineral insulated
(MI) industrial wiring cables must be installed
in accordance with the requirements of national
and local codes and standards, the installation
instructions in this manual, and the customer’s
specification. Read these important safeguards and
carefully follow the installation instructions.
• Ensure the cable has been stored properly and is in
good condition prior to commencing installation.
• Always use safe working practices when installing
cables, observing OSHA and other national safety
rules.
• Store cables indoors in a clean, dry, covered area,
if possible.
• During the time that the cables are exposed and
during cable pulling activities, protect cables from
nearby or overhead work to prevent damage to the
cable sheath.
• Do not pull cables around corners that have sharp
edges, such as corners in cable trays, or other
obstructions.
• Prevent damage to cables by removing any
abrasions or sharp edges from surface of support
system.
• Damage to cables or components can cause
sustained electrical arcing or fire. Do not energize
cables that have been damaged. Damaged
cable or ter minations may need to be repaired or
replaced. Damaged cable should be repaired by a
qualified person.
• When installing cables which may be exposed to
hydrocarbon flash fires, use only steel or stainless
steel in the support system.
ii | nVent.com
Содержание pyrotenax Alloy 825
