Raychem nVent HWAT-ECO V5 (EU), Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 24

EN
Timer
schedule
Graphically programme the Timer in 1 hour time blocks.
You can set a block to OFF, Economy temp,
Maintain temp, or HEAT-UP*
OFF MAINTAIN HEAT-UP ECONOMY
(*HEAT-UP= 100 % power, only when using the HWAT-R
cable. This is the legionella prevention mode and it is not
pre-programmed. Activate this preferably during night
hours to avoid scalding.
Use the modes button to overwrite the timer schedule.
Select a temperature mode to assign to the time bock
of choice.
5. PARAMETER SETTINGS (DEFAULT)
Language English
Country Not pre-defined; to be selected
Date 01 / 01 / 2017 or last saved date
Time 00 : 00 ; or last saved time
Building programme Not pre-defined; to be selected
Heating cable type Not pre-defined/ to be selected
Pipe diameter DN 25
Insulation thickness 30 mm
Ambient temperature 20 °C
Maintain temperature 55 °C
Economy temperature 50 °C
Low temperature limit 40 °C
High temperature limit 65 °C
Low temperature alarm OFF
High temperature alarm ON
Alarm sound ON
Key lock OFF
6. TECHNICAL SPECIFICATIONS
6.1 Building programme schedule
Apartments
HEAT-UP
TIME IN HOUR
APARTMENT WEEKDAY
MON
09:31
00 01 02 03 04
21
22 23
12 13 14 15 16 18 19
05
07 09 11
20 17
06 08 10
16
|
nVent.com/RAYCHEM