Raycap PowerPlus RDIDC-100-3R-1U Series, Инструкция по установке и эксплуатации

Страница: 17 / 28

INSTALLATION INSTRUCTION & OPERATION MANUAL
PowerPlus RDIDC-100-3R-1U-X
www.raycap.com
© Raycap | All rights reserved. • ( 320-1674) | Rev.A
Page 17 of 28
Scan QR for Complete Installation Instructions:
8. Module Settings
8.1
Settings Menus
• There are two different settings menus. The initial settings menu and the live settings menu.
• The
initial settings
menu will appear when the system detects differences between the current
module settings and previous module settings during system boot.
• The live settings menu is enabled when the ‘ UP ’ and ‘ DOWN ’ buttons of the Primary module are
pressed simultaneously for more than 3 seconds.
• The
initial settings
menu and the
live settings
menu are very simple menus.
8.2
Initial Settings Menu
• The
initial settings
menu will appear when the system detects conflicting setting during system boot,
or at initial power up. Each module will display the “
SETTINGS
” message.
• The Primary module is selected by pressing the ‘
ENTER
’ button of any module (e.g. Slot 1 module).
This module will become the Primary module and the other modules will be configured as Secondary
modules.
ENTER
UP
DOWN
Slot 1 Slot 2 Slot 3