background image

29 

 

The Extended Warranty does not cover: 

a)  In  normal  usage  the  paint  finish  of  your  Stove  may  change  colour  slightly.  As  these  circumstances  are 

considered normal, they are not covered by the warranty. 

b)  Enamelled  components  where  these  parts  are  subjected  to  abnormally  high  temperatures,  chemical 

abrasion  or  thermal  shocks,  resulting  in  chipping,  cracking,  bubbling  or  discolouration  and  crazing  of  the 

enamelled finish. 

c)  Damage  resulting  from  installation  and  usage  where  the  appliance  has  not  been  installed  or  used  in 

accordance with the Stoves installation and operation instructions, or if the installation does not conform to 

local building, fire and safety regulations. 

d)  Defects  or  faults  caused  by  specific  local  conditions  such  as  draught  problems,  water  damage  and 

condensation (including the remote control unit) 

e) Damage caused by unauthorised modifications, use or repair. 

f) Damage or defects caused by the product being stored in a damp, unheated environment. 

g)  Consequential  loss (to the  extent  permitted  by  law)  relating to other  associated  products  that  have  not 

been supplied by Aga Stoves. 

h) Consequential loss (to the extent permitted by law) related to decorations, furnishings or other household 

assets. 

i) Delivery to/or return transport costs, Removal and re-installation costs. or any labour cost to fit parts 

Repaired or replaced products are covered only for the remainder of the original warranty period. 

If you should ever wish to make a warranty claim because of a product fault or defect, you must inform us 

within a reasonable amount of time, this is within 14 days from the date on which the fault or defect first 

became apparent. If the product fault or defect is notified after 14 days from the date on which the fault or 

defect  became  apparent,  we  cannot  accept  any  liability  for  events  or  issues  which  arise  after  the  14  day 

period or which are caused or increased by the lack of notification which therefore prevented action being 

taken to restrict or eliminate any consequences arising from the fault or defect at an earlier date. 

In  the  event  of  a  product  fault  occurring  during  the  warranty  period,  we  will  send  the  appropriate 

component or goods necessary to rectify the fault, free of charge. but does not cover any labour cost to fit 

them. 

Nothing in the Extended Warranty shall make Aga Stoves or their partners liable for any or special, incidental 

or  consequential  damages,  injury  to  persons  or  property,  or  any  other  consequential  loss  beyond  the 

consumer’s statutory rights. The liability on Aga Stoves total liability extends only to the purchase price paid 

for the goods by the Premium Retailer, except where such a limitation is prohibited by statute. Aga Stoves, in 

the  event  of  a  warranty  claim,  reserve  the  right  to  either  replace  the  goods  in  question  or  to  refund  the 

purchase price of the goods as paid by the Premium Retailer. 

The Extended Warranty does not affect your statutory rights. 

The  above  warranty  terms  and  conditions  came  into  effect  on  1st  January  2013  and  are  applicable  for  all 

relevant products purchased after this date. 

Please note:

 This warranty is applicable for purchases within the United Kingdom (mainland only). 

 

Содержание STRATUS 100-30 XS






























Отзывы: