1. To set individual days, press
SET
once.
2. Adjust to the day required using
+
or
-
buttons.
3. Press
SET
to confirm the day chosen.
4. Adjust to the new times required as before.
5. Again, if an event is not needed set to 00:00.
6. Once day is set (both events), display should default to
time of day.
1. Press the
TIMER
button once.
2. 00:00 should be displayed.
3. Adjust to the time required using
+
or
-
buttons.
4. Press
TIMER
to confirm.
5. Press
TIMER
to show the time of day. To check the
remaining time on the minute minder, press
TIMER
once then press
TIMER
again to show the time of day.
Once the timer has finished, it will flash 00:00 and a
buzzer will sound. To stop press
TIMER
.
To return to
MANUAL
mode at any time whilst
programming, press the
AUTO/MAN
button and the time
of day will be displayed.
9
SETTING THE PROGRAMMER - DAILY
SETTING THE MINUTE MINDER
Fig. 9
DESN 514721
Fig. 10
DESN 514722
