It is important to have the appliance serviced once a year
by a competent maintenance engineer. It is
recommended that a regular servicing contract is made
with a registered installer.
With normal use a Boiler/Cooker annual service should be
carried out by a competent person in accordance with gas
safety regulations.
WARNING: IF A GAS LEAK OR FAULT IS SUSPECTED,
TURN OFF THE APPLIANCE AND CONSULT YOUR
LOCAL REGISTERED INSTALLER.
Rayburns are designed to be continuous burning
appliances. If left unlit for any length of time, leave the
doors slightly open to allow air circulation.
Both the cooker and boiler should be turned off, by the
user, the night before servicing is to commence, in order
to allow the appliance to cool down. A HOT APPLIANCE
CANNOT BE SERVICED. To turn off the boiler turn the
boiler thermostat knob to ‘O’.
To turn the cooker off, turn the cooker thermostat knob to
‘l’.
If a gas leak exists or is suspected the unit
MUST
be
isolated from the gas supply by turning off the gas at the
meter or appliance gas cocks, and the electrical supply.
The appliance
MUST
not be used until the fault has been
investigated and rectified, by your installer/service
engineer.
You
MUST IMMEDIATELY
report the suspected gas
escape to your installer/service engineer, or to the local
gas supplier.
The appliance will automatically close down until power is
restored and will then revert to operating at the setting
previously in use.
For safety purposes a combustion discharge safety
device is fitted (C.D.S.D. See Fig. 3). This will only
operate under adverse flue conditions. If the switch has
operated, it should be pushed in to reset. If this problem
persists contact your local engineer to determine and
rectify the cause. It is important not to reset more than
once as this may indicate a flue blockage.
Air entry louvres for combustion are located on the left
hand and right hand side of the lower plinth panel.
These must be kept free of lint (household dust, fluff, dog
hairs etc).
Do not allow any obstruction to the air entry, as it will
affect the operation of the appliance.
Please see that the permanent ventilation provided for the
safe and reliable operation of your Rayburn is never
blocked off.
9
MAINTENANCE
GAS LEAK OR FAULT
AIR ENTRY LOUVRES
VENTILATION
ELECTRICAL POWER FAILURE
COMBUSTION DISCHARGE SAFETY
DEVICE
CDSD RESET
BUTTON
FIG. 3
DESN 511788
