The gas to the stove is controlled by a pilot light. control
knob and a safety feature called a flame supervision
device.
To gain access to the gas control knob, open the control
access door (Fig. 1).
The tap knob bezel is marked with position for (OFF) (
●
).
PILOT (
★
) and a graduated section for minimum, and
maximum gas rate (fig. 2).
The stove is fitted with a piezo spark ignitor.
Note: If the main burner or pilot are extinguished for
any reason, DO NOT attempt to relight the pilot for
three minutes.
Open the control access door. Ensure that the glass door
is closed and locked and that the control knob is in the
OFF (
●
) position (fig. 2).
Fully depress the control knob and turn anti-clockwise
(keeping the control knob fully depressed) until the pilot
position ( ) is reached (fig. 2). If the pilot has not lit repeat
the operation. The pilot may be viewed through the
bottom of the window towards the left hand side.
Once the pilot is lit continue to hold in the control knob for
a further 10 - 15 seconds to establish the pilot. When the
control knob is released the pilot should remain alight. If
the pilot fails to remain alight repeat the procedure but
hold the knob in longer to allow the pilot to establish.
If required the pilot may be lit by a long spill or taper as
follows:
Open the door of the stove (using the tool supplied) (see
Fig. 3).
Apply a lighted long spill or taper to the pilot (See Fig. 4)
positioned at the front LH side of the burner tray.
Fully depress the control knob and turn anti-clockwise
(keeping the control knob fully depressed) until the pilot
position ( ) has been reached and the pilot should light.
Once the pilot is lit remove the long spill or taper,
continue to hold the control knob for 10 - 15 seconds to
establish the pilot. When the knob is released, the pilot
should remain alight - if the pilot fails to remain alight,
repeat the procedure, but hold the knob in longer.
When pilot is established close the door (using the
tool supplied).
3
OPERATION OF THE STOVE
TO LIGHT THE PILOT
FIG. 1
FIG. 2
FIG. 3
FIG. 4
Содержание COALBROOKDALE GS3i
Страница 7: ...6 LAYING THE FUEL BED FIG 10 FIG 11 FIG 12 ...
Страница 8: ...7 FIG 13 FIG 14 FIG 15 ...
