Raybar BRAVO 150, Руководство пользователя

Страница: 15 / 22

Starting Engine - Follow below mentioned steps to start the vehicle :
1. Unlock steering, and turn ignition key to “ON”position. Shift gear to“N”neutral
position or pull clutch lever.
2. Grip front brake lever or press rear brake pedal.
3. Press kick downwards powerfully with foot or press electric starter switch with right
thumb.
4. Rotate throttle backwards to add proper volume of fuel to start motorcycle. Once
motorcycle has started, return kick lever. Preheat 3~5 minutes at idle
speed(1500±100)r/min.
Riding Operation - After starting and preheating, return main and side stand. Now hold clutch
lever and pull it towards yourself. Then press pedal gear change with left foot and shift to the
first gear.
(A) Release the brake lever.
(B) Rotate throttle slowly to accelerate and release clutch lever slowly, this will give
acceleration to motorcycle.
(C) Once clutch lever is released completely and motorcycle reaches to a certain speed,
shift the gear from lower to upper by using clutch.
Starting engine & riding operation
accelerate
slow down
accelerate
slow down
(12)