17
Auto Power Dump
When lowering the power level, the monolight will
automatically discharge a flash when the new setting
is confirmed. Do not look into the flash tube area
when performing this change.
SLAVE AND PRE-FLASH SETTINGS
The Raya SDR400 Alpha Monolight has five slave
settings. You can toggle between the modes by
repeatedly pushing the slave button until the
required number is indicated by the light on the right
side of the panel.
Default Setting:
No LED light is activated. Slave
mode is OFF.
Setting 1:
Slave mode ON. A single flash from
another source will trigger the monolight.
Setting 2:
The monolight will trigger after a half
second delay. After the first flash from another
source, the monolight will go into a standby mode,
and the SDR-400 will trigger at the next flash.
Setting 3:
Monolight will trigger after one preflash.
Setting 4:
Monolight will trigger after two preflashes.
Setting 5:
Monolight will trigger after three
preflashes.
Содержание SDR-400
Страница 1: ...ALPHA MONOLIGHT USER MANUAL SDR 400 ...
