Tools needed
Pozidrive screwdriver (not included)
ASSEMBLY
1
Group one top plate (A),
one base plate (B) and
two column side plates
(C) together with 8 wood
screws (as shown on page
1)
3
With the column side plates
fixed to the base plate, slide
the plastic cable cover strip
(D) down the slots to the
rear of the column sides.
Using 4 wood screws, align
the holes in the base plate
with the pre-drilled holes
in each column side plate.
Note that the rounded
edges of the column side
plates should face the
front, wider edge of the
base plate. Tighten screws
evenly.
4
Using 4 woodscrews, align
the holes in the top plate
with the pre-drilled holes
in each column side plate.
Tighten screws evenly.
2
3
5
5
Fit 4 self-adhesive isolation
pads (F) to the outer
corners of the top plate (A).
