BATTERY CHARGER 6/12 V - 2/4 A
Introduction
To get the most out of your new battery
charger, please read through these
instructions before use. We also recommend
that you save the instructions in case you
need to refer to them at a later date.
Technical data
Battery type:
All 6 V and 12 V lead acid
batteries of 4-120 Ah
Voltage/frequency:
2
2
0V
-240V
~ 50
/60
Hz
Charge voltage and current:
6/12 V - 2/4 A
max. 70 W
65
Output:
IP class:
With
an
8
-step fully
automatic
microprocessor control
.
With protection against overheating,
overcharging, short circuit, reverse polarity
and low voltage
.
Main components
1.
MODE button
2.
Display
3. Cord for battery clamps
4.
Battery clamp - negative (black)
5.
Battery clamp
- positive (red)
6. Inlet power cable
Display
A- Symbol for charging a12V battery
B- Symbol for 12V-charging at low
temperature
C- Symbol for charging a 12V GEL battery
D- Symbol for charging a 12V LiFePo4
battery
E- Symbol for slow charging
F- Symbol for slow charging older
batteries
G- Symbol for charging 6V batteries
H- Symbol for defective battery
GB
This product is double insulated
and comes under protection class II.
19
