30
Compressor
Pull out the compressed air hose (2) from the
jumpstarter.
Turn the on/off button (8) to the ON position.
If you intend to infl ate a tire, use the valve
nipple on the compressed air hose(2).
Attach the valve nipple to the wheel valve
and lock it securely by swiveling the arm on
it down.
You can check the current tire pressure on
the manometer (3).
Switch the compressor on using the on/off
switch (4). The compressor infl ates the tire.
Switch the compressor off once the desired
tire pressure is shown on the manometer.
Remove the valve nipple from the valve and
wrap the compressed-air hose around the
holders on the jumpstarter again.
If you intend to infl ate something else,
use one of the pump nipples provided.
Otherwise, follow the procedure as described
above.
Switch the energy station off by turning the
on/off knob to the OFF position.
Light
Turn the on/off button (1) to the ON position.
Press the on/off button (10) to turn built-in
light (7) on or off .
USB port
Press the on/off button (12) to turn the USB
port on or off . Indicator for the USB port
comes on to show that the USB port is live.
Connect your mobile phone or other similar
device to the USB port to charge it.
12 V socket
Open the cover over of the 12 V socket and
connect the desired 12 V equipment using a
cigarette lighter socket.
Turn the on/off button (8) to the ON position.
Please note that the connected equipment
may drain the energy station battery rapidly
if it consumes a lot of power.
Switch the energy station off by turning the
on/off knob to the OFF position.
NB!
If the connected equipment short-
circuits or overloads the jumpstarter, the
built-in circuit breaker will automatically
turn the power off . Turn off the connected
equipment and fi nd the fault in it. Turn off
the jumpstarter and wait 30-40 minutes
before continuing to use the jumpstarter.
NB!
Do not connect the 12 V adapter
provided to the 12 V socket on the energy
station!
Cleaning and maintenance
Wipe the energy station with a well-wrung
cloth.
The energy station must be stored in a cool
dry place.
Ensure that the energy station is recharged at
least once every two months to maintain the
battery capacity.