manualshive.com logo in svg

Raveon RV-M7, Техническое руководство, Страница: 4 / 67

Поделиться
Скачать
Raveon RV-M7 Скачать руководство пользователя страница 4

RV-M7 Technical Manual

 

4

 

DTR ....................................................................................................................................................................................... 59

 

CD Output Data Framing ...................................................................................................................................................... 59

 

15.2

 

Null modem without handshaking .............................................................................................................................. 60

 

15.3

 

Compatibility issues ..................................................................................................................................................... 60

 

15.4

 

Null modem with full handshaking .............................................................................................................................. 60

 

15.5

 

Compatibility issues ..................................................................................................................................................... 61

 

16.  MIMIC Mode Overview ...................................................................................................................... 61 

17.  Troubleshooting ................................................................................................................................. 63 

Symptom:  Unit will not receive ........................................................................................................................................... 63

 

Symptom:  Unit will not transmit ......................................................................................................................................... 63

 

Symptom:  Receive light blinks, but no data is received ...................................................................................................... 63

 

Symptom:  Long delay before transmitting .......................................................................................................................... 64

 

Symptom:  Cannot enter Command Mode .......................................................................................................................... 64

 

Symptom:  Modem appears dead. ....................................................................................................................................... 64

 

Symptom:  Repeater will not repeat. ................................................................................................................................... 64

 

18.  Mechanical ......................................................................................................................................... 65 

1. 

 

General Information about the RV-M7 

1.1   Congratulations! 

Congratulations on your purchase of a 

M7

 radio modem – the most advanced radio modem of its kind 

available today.   

Please take a few minutes to read this manual carefully. The information presented here will allow you 
to derive maximum performance from your radio modem.  After reading it, keep the manual handy for 
quick reference, in case questions arise later on.   

1.2   NOTICE 

Besides the fuse, there are no user-serviceable points inside this transceiver. All service work must be 
referred to your Authorized Service Center or Raveon Technologies Service Department.

  

 

1.3   Safety / Warning Information 

WARNING 

- DO NOT operate the RV-M7-U radio modem when bystanders are near the antenna.  

For the RV-M7-UC, do not operate the radio modem when bystanders are within 2 feet (60cm) of the 
antenna. 

For the RV-M7-VB, do not operate the radio modem when bystanders are within 3 feet (90cm) of the 
antenna. 

The RV-M7 radio should be installed in safe, protected and restricted environment. 

While the RV-M7 does have an internal 3A fuse, there is no internal circuit breaker.  The radio should be 
connected with an external circuit breaker. 

Blasting Caps and Blasting Areas 

To avoid possible interference with blasting operations, turn off this radio or remove the battery pack 
when you are near electrical blasting caps, in a blasting area, or in areas posted: “

Turn off two-way 

radio.

” Obey all signs and instructions.  

Содержание RV-M7




































































Отзывы:

Нет отзывов