Raven viper, Инструкция по установке и эксплуатации

Страница: 150 / 182

C
HAPTER
14
142 Viper/Viper 4+ Installation & Operation Manual
COMPASS
The Compass widget displays the current GPS heading as detected by the receiver. Tap the Compass
widget to toggle the compass display.
GUIDANCE WIDGETS
LIGHT BAR
On-screen Light Bar widgets provide the operator
with a heads-up display of the machine position
during swath guidance. Select the size of the light bar widget desired to provide a representation of the distance
and direction to the displayed guidance path.
The Light Bar widgets may be used in conjunction with an external light bar mounted on the vehicle. Refer to the
Light Bar Devices section on page 106 for assistance with light bar settings.
DISTANCE FROM GUIDANCE LINE
The Distance from Guidance Line widget will be used with a guidance line set using the AB
utilities and will display the distance and direction from the current vehicle position to the
displayed guidance path.
Refer to the Setting Guidance Paths section on page 151 for assistance with setting an AB line with the AB Utilities
widget.
NUDGE ARROW
The Nudge Arrow widget offers the same display information as the Nudge Status widget,
but provides access to nudge controls directly on the current display view or mode. Select
this option to allow the operator to manually adjust the guidance line directly from the guidance display during
field operations.
Tap the arrow buttons displayed on the Nudge Arrow widget to nudge the displayed guidance line by the active
nudge value. Touch and hold the widget to access the Nudge and Swath prompt. Refer to Nudge Features and
Tools section on page 155 for additional assistance using the nudge features.
NUDGE STATUS
The Nudge Status widget displays the current nudge applied to the displayed guidance line. Touch and
hold the Nudge Status widget to access the Nudge and Swath prompt. Refer to Nudge Features and
Tools section on page 155 for additional assistance with using the nudge features.
AB UTILITIES
The AB Utilities widget will be necessary to select guidance modes, set AB paths, or to
save or load an AB guidance path. Tapping the AB utilities widget will set A and B points
for a guidance path (if a guidance path is not set) or access the AB guidance line tools
and will provide access the Nudge and Swath prompt. Refer to the Setting Guidance Paths section on page 151 for
additional assistance with using the AB guidance mode features.