Raven TM-1, Инструкция по установке и справочник

Страница: 7 / 27

CHAPTER
2
Manual No. 016-0171-049 3
Chapter 2
Installation
Overview
This chapter contains instructions for mounting the Raven TM-1 Tilt Module and routing the GPS signal to and
from the sensor. Examples of system diagrams for widely used systems are included in Chapter 5,
System
Diagrams .
Requirements
Refer to the following requirements when selecting a mounting location for the TM-1 Tilt Module:
•
The TM-1 Tilt Module is not weather proof. Mount the sensor inside of the vehicle cab.
•
The unit is designed to be mounted on a flat surface parallel with the ground with the ports facing up.
•
Mount the unit with the orientation arrow pointing in the direction of forward vehicle travel.
Note:
If necessary, the TM-1 may be mounted with the ports facing down. If the TM-1 is mounted upside
down, the orientation arrow must point in the opposite direction of forward travel.
•
The TM-1 contains sensitive measurement sensors. Avoid mounting the unit anywhere where it may be
kicked or jarred during normal operation, such as near pedals or under vehicle components that move.
•
The TM-1 Tilt Module should be mounted securely using steel bolts or screws through the mounting
bracket.