Raven TC1/HDU, Руководство по установке

Страница: 18 / 26

CHAPTER 3
14 TC1/HDU Installation Manual for Versatile 380, 405, 430, 460, 520, 570, and 610 (Steer Ready)
2. Route the valve harness outside and under the cab through the access hole located under the floor mat and
behind the seat.
3. Route the valve harness toward the machine steering valve.
FIGURE 12. Valve Harness Connected to TC1 Valve
4. Connect the TRANSDUCER connector to the pressure transducer.
5. Connect the VALVE connector to the valve.
6. Connect the WAS connectors by teeing into the wheel angle sensor near the steering cylinder.
FIGURE 13. WAS Connection on Articulated Machine
7. Connect to the GPS receiver with the Serial GPS IN and GPS PWR connectors.
Valve
Connection
Pressure Transducer
Connection