Raven SmarTrax 117-5031-001, Руководство по установке

Страница: 22 / 35

Chapter 4
18 Buhler Versatile 4WD 305-575 SmarTrax™ Installation Manual
FIGURE 2.
SmarTrax Node Installed
Note:
The forward vehicle direction is 6 in the pictured node orientation.
2.
Install the SmarTrax node (P/M 063-0173-228) on the node mounting bracket (P/N 107-0171-914) using
three 5/16” hex bolts (P/N 311-0052-104), three 5/16” washers (P/N 313-2300-012), and three 5/16”-18 lock
nuts (P/N 312-4000-059).
3.
Install the two large, rectangular connectors of the node harness (P/N 115-4001-109) into the correct ports
of the node.
4.
Tighten the bolts on the harness connectors to secure the connections.
5.
Position the node mounting bracket over the parking brake holes.
6.
Secure the node mounting bracket to the machine using the M10 x 30 mm bolts that were removed in
step 1.
Node Mounting Locations
FIGURE 3.
Node Mounting
When choosing the location for the SmarTrax node, consider the following points:
•
Mount the SmarTrax node inside the machine’s cab on a flat, level surface for proper performance and
cable connection.
Direction Arrows
Any two arrows must
be parallel with level
ground
Mounting Tabs
1
2
3
4
5