Raven SC1, Калибровка и руководство по эксплуатации

Страница: 38 / 88

CHAPTER 4
34 Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Tractors and Sprayers
Select the GPS icon to display the GPS Status screen.
CRX FEATURES AND OPERATION
CRX WIDGET DEFINITIONS
The following are common status or mode information which may be displayed on a ROS device while operating
the SC1/TC1 system while in a job:
Display Message
Status
Displays the selected GPS convergence status.
• Error
• No Signal
• Converging
• Converged
Current Accuracy
A value representing the reported horizontal accuracy of the
current GNSS solution as detected by the receiver.
Number of Satellites The number of satellites currently in view by the GPS receiver.
HDOP
Horizontal Dilution of Precision.
A higher value indicates that the satellites currently used for
the machine position are grouped closer together and
accuracy may be reduced. If the satellites are too close, the
system may record a High HDOP DTC.
Age of Differential
Time (in seconds) since the last differential correction was
received. This field will not display a value if a differential
source is not currently tracked.
Vehicle Direction
Select the Vehicle Direction button to manually override the
displayed direction of travel.
Display Message
The SC1/TC1 node is detected, but the operator must accept
responsibility for the operation of the SC1/TC1 system.
No A-B path or guidance line has been set or an active DTC is
preventing the SC1/TC1 system from engaging.