SBGuidance Disc I Rev. A I CAN
SBG-Disc CAN-EN-Rev. A
Page 23/
50
3.
Disc set assemblies
Three different options are available for disc
steering:
1.
Steering set, single disc; 1 cylinder
2.
Steering set, dual disc, 1 cylinder,
mechanical track rod
3.
Steering set, dual disc, 2 cylinders,
hydraulic track rod
Depending on the implement used, it is advised
to have the disc or discs rear-mounted. Discs
mounted behind the implement ensure the best
results.
The disc should cut to a depth of about 3-5 cm,
depending on the type and humidity of the soil.
If the soil has already been ploughed to a depth
of 15 cm, this means that the disc should cut to
a depth of 20 cm.
Check the working depth and prevent the
disc from cutting too deep into the firm
soil!
The disc should preferably be rear-
mounted. It should be mounted behind
the implement.
When a dual disc is used, preference should
always be given to the use of a track rod with a
single cylinder. Only use two cylinders if a track
Содержание SBGuidance Disc
