Raven SBGuidance Disc, Руководство по установке

Страница: 15 / 50

SBGuidance Disc I Rev. A I CAN
SBG-Disc CAN-EN-Rev. A Page 15/ 50
2. Assembly of basic components
Some components are required for both disc
and wheel steering. In the case of disc steering,
it is practical to start with the assembly of the
disc legs (section 3). Components such as the
GPS antenna, DynamIQ ISO/SGC, Steering
Controller and hydraulic manifold can possibly
be added to the construction of the disc leg.
2.1. Checking the hydraulic manifold
The manifold can be used either in Load-Sense
(LS) mode or in Open Center (OC) mode. A
selector plug should be used, depending on the
type of hydraulics used (Table1,
Figure 5
).
Check the type of selector plug (
Figure 4
)
before mounting the manifold.
Type of hydraulics Selector plug
Load Sense 13348001019
CARTRIDGE, LS, LONG
Open Center 13348000002
CARTRIDGE, OC ELP30
If the manifold is connected to an external
spool valve of the tractor, the manifold must be
configured in Open Center mode. The LS port
of the manifold must be plugged.
If the manifold is connected to the power
beyond connection at the back of the tractor,
the manifold must be configured in LS mode.
The LS mode is the preferred mode.
Table1 Selector plug manifold
Figure 5 Types of selector plug
Figure 4 Selector plug