Raven RS1 MD, Руководство по установке, Страница: 20 / 32

C
HAPTER
3
18 Raven RS1™ MD Guidance and Steering Installation Manual
FIGURE 17. Flanged Bearing Assembly Installed
4. Install the 1/2” plastic flanged bearing (P/N 325-0000-036) on the short leg of the L-shaped bracket
(P/N 107-4000-013) using two #10-24 wing nuts (P/N 312-3000-013).
FIGURE 18. L-Shaped Bracket Installed
5. Secure the L-shaped bracket to the installed U-shaped bracket using two 5/16”-18 x 3/4” carriage bolts (P/N
311-0069-111) and two 5/16”-18 zinc flanged lock nuts (P/N 312-1001-184).
INSTALL THE MECHANICAL DRIVE
NOTE: Depending on the machine’s configuration, it may be necessary to install the anti-rotation pin in the
mechanical drive’s casing after the mechanical drive is installed instead of before as indicated in the
instructions below.
Strap Clamp
Assembly
(P/N 321-0000-422)
U-Shaped Bracket
with Flange
(P/N 107-4001-012)
L-Shaped Bracket
(P/N 107-4001-013)
Flanged Bearing
(P/N 325-0000-036)