Raven RCM, Руководство по эксплуатации

Страница: 16 / 48

CHAPTER 3
14 RCM Dry Manure/Litter Setup Guide
25.Enter an initial value for RPM 1 High Limit.
NOTE: The Low and High Limit values may be adjusted as needed for the per each machine configuration as
desired by the operator. Refer to Reference Chapter 6, Machine Settings , for assistance with setting an
initial RPM 1 High Limit value.
NOTE: Optionally, enable the Alarm check boxes for the Low or High Limit values to sound an audible alarm
if the PTO shaft speed nears the limit value.
26.Select the Next button in the lower, right corner of the page to proceed.
FIGURE 10. Setup Fan/Spinner RPM Calibration
27.Place a check mark in the box next to Product 1.
NOTE: This will assign the RPM sensor to Product 1 and disable product application unless the RPM sensor
detects PTO shaft rotation. This is a safety catch to prevent belt movement without the beaters
running.
28.Select the Next button in the lower, right corner of the page to proceed.
FIGURE 11. Setup RPM Sensor Assignment
29.Use the Control Valve Type drop down list to select the PWM Close valve.