Raven AutoBoom, Руководство по установке

Страница: 67 / 92

5
Manual No. 016-0230-004 Rev. F 61
UltraGlide
4.
If the machine’s pressure hose end is 11/16”, install a 13/16” ORFS (F) to 11/16” ORFS (M) reducer fitting
(P/N 333-0012-115) in the straight end of the installed tee fitting.
5.
Connect the machine’s pressure hose to the straight end of the installed tee fitting.
6.
Install a 13/16” ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the 90° end of the installed tee
fitting.
7.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-301) on the fitting installed on the 90°
end of the tee fitting.
8.
Connect the 45° end of the installed hydraulic hose to the fittings installed in Port P of the AutoBoom valve.
9.
Locate and disconnect the tank hose from the right side of the machine’s hydraulic valve.
10.
Install a 13/16” ORFS M/M/F swivel run tee fitting (P/N 333-0012-028) in the tank port of the machine’s
hydraulic valve.
11.
Connect the machine’s tank hose to the opposite end of the installed tee fitting.
12.
Install a 13/16” ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the 90° end of the installed tee
fitting.
13.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-301) on the fitting installed on the 90°
end of the tee fitting.
14.
Connect the 45° end of the installed hydraulic hose to the fittings installed in Port T of the AutoBoom valve.
Install Left and Right Cylinder Hoses
FIGURE 6.
Left Cylinder Hose Installed on Accumulator
1.
Disconnect the machine’s hose from the left tilt cylinder accumulator.
2.
Install a 13/16” ORFS (F) to 11/16” ORFS (M) reducer (P/N 333-0012-115) on the accumulator.
3.
Connect a 9/16” SAE O-ring (M) to 11/16” ORFS swivel straight adapter fitting (P/N 333-0012-081) to the
9/16” SAE O-ring (F) to 9/16” SAE O-ring (F) ball valve (P/N 334-0003-036).
4.
Connect the ball valve and fitting assembly to the installed reducer fitting.
5.
Connect the 13/16” ORFS (M) to 9/16” SAE O-ring (M) straight adapter fitting (P/N 333-0012-082) to the
installed ball valve.
P/N 333-0012-115
P/N 333-0012-081
P/N 334-0003-036
P/N 333-0012-082
P/N 333-0012-028
P/N 214-1000-299
Accumulator
Machine’s Hose