Raven AutoBoom Willmar Eagle 8500, Руководство по установке, Страница: 21 / 82

3
Manual No. 016-0230-014 15
PowerGlide
FIGURE 7.
Tank Hoses Installed on the Machine
7.
Locate the tank hose on the machine’s hydraulic valve.
8.
Disconnect the machine’s tank hose from the hydraulic valve.
9.
Install the 1-1/16” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-109) to the open tank port of the
machine’s hydraulic valve.
10.
Install the machine’s tank hose on the opposite end of the installed tee fitting.
11.
Install the 1-1/16” end of the supplied hydraulic hose (P/N 214-1000-320) on the 90° end of the installed tee
fitting.
12.
Connect the other end of the installed hydraulic hose to Port T on the AutoBoom valve.
Install the Left and Right Cylinder Hoses
FIGURE 8.
Machine’s Cylinder Raise Hose
1.
Disconnect the machine’s raise hose from the base-end of the left tilt cylinder.
2.
Remove the orifice fitting from the open cylinder port.
3.
Reinstall the machine’s raise hose on the base-end of the left tilt cylinder.
4.
Disconnect the machine’s raise hose from the base-end of the right tilt cylinder.
5.
Remove the orifice fitting from the open cylinder port.
6.
Reinstall the machine’s raise hose on the base-end of the right tilt cylinder.
7.
Disconnect the machine’s left raise hose from the machine’s hydraulic valve.
Machine’s Orifice
Fitting (Remove)