Raven AccuBoom, Руководство по параллельной установке

Страница: 7 / 16

3. Connect the AccuBoom Cable to the boom switch wires.
a.
Remove the four screws securing the switch panel cover.
b. Carefully pull the switch panel upward to access the switches.
c. Locate the boom wires that parallel with the console wires.
Helpful Hint: One of the switch connectors has
an adapter allowing two wires to be connected to
the switch connector. This is the positive boom
switch wire. The connector this wire is connected
to will be used to trigger the relay box in manual
mode. Make sure you identify these connectors
for later connection.
Manual #016-0171-013 Rev. C 01/07
5