Raven AccuBoom Miller Condor Series, Руководство по установке

Страница: 5 / 12

Manual #
016-1001-053
3
C
H A P T E R
C
HAPTER
2
I
N S T A L L A T I O N
Use the following procedure to properly install the CAN AccuBoom
system.
Mounting the
CAN Node 1. Locate the center rack cross-member on the right rear corner of chassis.
2. Attach the CAN node mounting bracket to the cross-member using the
supplied U- bolts and hardware. (See Figure 1)
3. Attach the CAN node to the CAN node mounting bracket using
supplied Hardware. (See Figure 1)
Figure 1: Mounting CAN Node