Ravelli HR EVO 170, Инструкция по установке, использованию и техническому обслуживанию

Страница: 64 / 200

HR EVO 170 - 250
use and maintenance manual
Pag.64
Rev.1 16/03/2018
ENG
Dimensioni: 99 x 55,5mm.
Formato file: pdf vettoriale
coralDRAW X5
File: stufa orizzontale Touch slim.cdr
Personalizzazione per: Micronova
MICRONOVA S.R.L.
Disegnatore: Michele Rossetti
18.04.2014 V:2.0
Grigio tortora
non conduttivo
Nero 10%
non conduttivo
Trasparente
Biadesivo 3M 9088
vista anteriore vista posteriore
SET
Ribassamento 1mm.
PNO100503PX00
A1 Fume extraction fan
A2 Auger’s mortor
A5 Auger’s motor additional tank*
A6 Igniter
A7 Heating pump A9
A8 Heating pump coupled to second
pump A10
A9 Three ways motor valve*
A10 Sanitary pump coupled to heating
pump A8*
A12 Boiler consent AUX*
B1 Water probe safety boiler (S1)
B2 Water probe heating (S2)
B3 Fume probe
B4 Room thermostat/Puffer heating ther-
mostat*
B5 Water pressure tranducer
B6 Level pellet 1
B7 Level pellet 2
B8 Water probe sanitary boiler (S3)*
B9 Flowswhitch/ thermostat sanitary
boiler*
B12 Fume exttractor verifier encoder
B13 Air flow meter
B14 Pressure switch
B15 Thermostat safety pellet
B16 Thermostat safety H2O
B17 Room probe
B18 Security Microswitch firedoor-ash
*Opt.
Wiring diagram
Connections
! IMPORTANT
The connections must be set up by a technician that is qualified and/or authorised by the
Manufacturer.
Electrical connection
The boiler is equipped with a three-pole cable (Fig.2), for a correct installation it is necessary to provide the dedicated electrical
connection under magneto-thermic (Fig.1) of adequate size according to the absorption of the generator in order to guarantee the
maximum safety of the installation.
Testing and commissioning
Stove start-up must be preceded by testing, which includes an operational check of the following elements:
•
connection to the smoke evacuation system;
•
checking that all materials used to build the smoke duct, chimney and chimney pot are regulation and suitable for use.
The testing is positive only when all operational phases have been completed without any anomaly being detected.
Fig.1
Fig.2