Ravelli APCF1, Руководство пользователя

Страница: 4 / 11

Using the Tripod
Initial Set Up
To begin using the tripod, open the carrying bag using
the zipper and pull the tripod out of protective plastic bag. Your
tripod is stored in the inverted position. Invert each leg and
adjust the center column.
Height Adjustment
Adjusting the
height of the tripod
can be done by simply
twisting the rubber
knobs located on the
legs, clockwise to lock
or counterclockwise to
unlock. Extend the
legs down to the
desired height, then
lock the rubber knobs.
(Note: When
adjusting the height,
try to extend the
thicker leg segment first, as they are thicker and provide
greater stability.) If after you have fully extended the legs, you
have still not reached the maximum operating height, you may
adjust the center column up.
Quick Tip: You can unlock all segments on each leg at once by
grabbing them at the same time and then twisting counter
clockwise to unlock. Extend the legs then lock each knob. To
quickly retract the legs when they are extended, unlock each
knob on one leg starting with the thicker portion of the leg,
retract the leg then tighten all knobs with one hand turning
clockwise.