Features and Benefits
Your
custom installation speakers are designed to blend
seamlessly into your home interior while providing superior sound quality.
All
custom installed products feature a self-engaging
mounting system that does not require brackets. Simply cut a hole in the
mounting surface, remove the grille from the speaker, connect the wires and
place the speaker in the hole. Then tighten the four or six mounting “dogs”
using the front panel screws. The dogs will automatically rotate 90 degrees
then clamp the speaker frame to the mounting surface as you tighten the
screws.
offers pre-construction brackets with all its custom
installed speakers. The pre-construction brackets can be installed where the
speakers will be mounted before the drywall goes up. The drywall contractor
will cut the corresponding holes as the drywall is installed. This reduces the
installation time and allows for pre-planned wiring.
All speaker or pair of speakers includes a Cut-out template and Paint mask.
The Cut-out template allows the installer to accurately measure the hole to
be cut in the dry wall. The Paint mask provides protection for the woofer and
tweeter while painting the speaker baffle.
The two-piece baffle design allows the tweeter to be directly mounted on the
bridge itself rather than the pole mounting found in most current designs. This
setup allows the speaker to handle more power with increased cone stability,
resulting in decreased harmonic distortion.
Rave Technology
Rave Technology
Rave Technology
Installation
Pre-Construction Bracket
Cut-Out Template and Paint Mask
Stable Tweeter Housing
Do not over tighten.
Rave Technology
G6434 South Dort Highway, Suite 2
Grand Blanc, Michigan 48439
Tel: 1-810-953-3918
www.ravetechnology.com
