4
Step 4
Zip on the backrest and clip both
support straps to the rings
located on the outer edges of the
kayak cover.
Step 5
Connect the three pieces of
aluminum together using the two
couplers. Tighten the collets on
the ends of the couplers until
snug and the aluminum shafts
can’t be pulled out. To avoid
cracking the plastic pieces, do not over tighten.
Orient the paddles to the desired position on the ends of the
aluminum shaft and tighten the collets until the paddles are
snug and cannot be slipped off.
Step 6
Carry, DO NOT DRAG, your kayak to the water and enjoy.
