11
Attaching the Ladder
Step 1
The ladder consists of two pieces: a ladder with straps
and a molded plastic ladder stabilizer.
Orient the stabilizer on the notched side of the top
two ladder steps and the curved portion is facing
upwards towards the top of the ladder. While
maintaining this orientation, flip the ladder upside
down to expose the underside of the steps.
Step 2
Line up the large opening of the keyhole slots
with the four bolts on the underside of the top
two steps.
Step 3
Slide the stabilizer towards the ladder to fully engage the bolts in the
narrow end of the slots. Tap the stabilizer with
your hand to ensure the bolts are fully engaged
in the slots.
Note:
If the stabilizer feels loose after mounting,
tighten the bolts slightly leaving minimal
clearance between the bolt flange and the plastic stabilizer. This slight
clearance will allow the stabilizer to be easily removed by hand
(without tools) for storage.
To remove stabilizer, simply slide in opposite direction.
Curved portion
