10
If you will be using another inflation device with a larger nozzle, use
the 1 ¼” diameter coupler (included) between the valve adaptor and
the output hose of your inflator.
Make sure the hose is attached to the blower port of the vacuum for
inflation. Insert the adapter into the air valve and lock into place by
turning clockwise.
Inflate until the tube is firm and resistant to pressure. Your fist should
create only a slight depression when pushed against the tube and the
surface should be stretched taut in all directions. Replace cap to
ensure an air tight seal.
To check the exact pressure of your product the use of a RAVE Digital
Pressure Gauge (Item #02496), not included is recommended.
NOTE:
It is normal for the air pressure within the tube to fluctuate
depending on air and water temperatures. It may be necessary to
increase or decrease the air pressure in your product accordingly. To
avoid damage on extremely hot days it may be necessary to check and
release the air pressure from your product throughout the day.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2.5 PSI (0,17 bar) if filling with compressed
air. Excessive pressure can cause the tube to rupture with
potentially damaging force to eyes, ears, skin and limbs.
Use of an air compressor or over-inflation can rupture the
tube beyond repair, thus voiding the warranty.
!!
